SCRIPT PHASER
A phaser modelled on a seventies pedal, with only four controls.
What it does
SCRIPT PHASER is a phaser modelled on a pedal from the seventies. You only set the speed, depth and mix.
It gives a simple, vintage rotation and suits a clean or lightly broken-up tone.
How to use it
- Set RATE slow and DEPTH medium for a soft rotation under chords.
- Set RATE faster for a rhythmically pulsing tone.
- Use it before a lightly driven overdrive for a lively riff sound.
- Raise DIRECT MIX if you want to keep more of your dry tone.
Where it goes in the chain
Usually before the amp or before the overdrive. After the amp it sounds smoother. Before delay and reverb.
Starting points
Warm rotation
RATE 30 · DEPTH 50 · EFFECT LEVEL 100
A calm, round phaser for chords.
Fast pulse
RATE 70 · DEPTH 60 · EFFECT LEVEL 90
A lively, fast rotation for a riff sound.
Light colour
RATE 25 · DEPTH 35 · DIRECT MIX 50
Just enough rotation to bring a clean tone to life.
Every setting
| Setting | Range | What it does |
|---|---|---|
| RATE | 0 / 1 / 2 / 3 … 1/16T / 1/32 (119 steps) | The speed of the rotation: a number from 0 to 100, or a note value such as 1/4 or 1/8D, which follows the tempo (BPM) of the memory. |
| DEPTH | 0 to 100 | How strong the rotation is. Low stays subtle, high sounds clearly rolling. |
| EFFECT LEVEL | 0 to 100 | The volume of the phaser signal in the mix. Higher gives more swirl, lower lets your own tone lead. |
| DIRECT MIX | 0 to 100 | The volume of the dry signal added to the mix. At 0 you hear mostly the effect, higher lets more of your normal tone through. |
The settings were checked against the BOSS GX-100 Parameter Guide, version 2.00. This explanation was written by the makers of GX Board, not by BOSS. The official description of every setting is in the BOSS Parameter Guide. SCRIPT PHASER in the BOSS Parameter Guide · GX-100 manuals at BOSS
More in Modulation
Turn it yourself?
In GX Board, SCRIPT PHASER is a device in your rack, with all its controls on the front.