BASS S-BEND bass
Makes the pitch of your note drop or rise at the press of a button.
The version for guitar: S-BEND
What it does
S-BEND gives your note a quick pitch slide: down or up over a chosen number of octaves and back again. It happens automatically once you turn the TRIGGER on.
RISE TIME and FALL TIME set how fast the slide goes up and back.
How to use it
- For a dramatic drop or rise at the end of a phrase or a song.
- Set PITCH to -1 OCT for a heavy dive or to +1 OCT for a short upward move.
- Use a short RISE TIME for a fast, rough move and a longer one for a gliding move.
- Use it sparingly as an effect, not as a fixed sound.
Where it goes in the chain
Put it early in the chain, after a compressor and before drive and amp, so the pitch tracking works on a clean signal.
Starting points
Nosedive
TRIGGER ON · PITCH -1 OCT · RISE TIME 40 · FALL TIME 5
A quick drop to an octave below.
Upward slide
TRIGGER ON · PITCH +1 OCT · RISE TIME 60 · FALL TIME 20
A slide upward for a fill.
Every setting
| Setting | Range | What it does |
|---|---|---|
| TRIGGER | OFF / ON | Starts the effect when you switch it from OFF to ON. When a memory is saved, it is stored as OFF. |
| PITCH | -3 OCT / -2 OCT / -1 OCT / +1 OCT / +2 OCT / +3 OCT / +4 OCT | How far the pitch moves, in octaves, from three octaves down to four octaves up. Smaller distances sound more natural on bass. |
| RISE TIME | 0 to 100 | How long the effect takes to reach the set pitch. Low is quick, high is a slow slide. |
| FALL TIME | 0 to 100 | How long the effect takes to return to your normal note. Low is straight back, high is a long return. |
The settings were checked against the BOSS GX-100 Parameter Guide, version 2.00. This explanation was written by the makers of GX Board, not by BOSS. The official description of every setting is in the BOSS Parameter Guide. BASS S-BEND in the BOSS Parameter Guide · GX-100 manuals at BOSS
More in Pitch and simulation
Turn it yourself?
In GX Board, BASS S-BEND is a device in your rack, with all its controls on the front.