BASS HARMONIST bass
Adds one or two voices that follow your bass notes, with your clean bass kept in.
The version for guitar: HARMONIST
What it does
The harmonist adds one or two harmony voices to every note you play, at a chosen interval. It analyses your pitch and follows the scale, so the distance fits the note.
DIRECT LEVEL keeps your own bass fully in the sound, so the root stays firm.
How to use it
- Add a voice an octave lower or higher for a thicker or brighter bass.
- Use a third or a fifth next to your note for a chord-like sound in a solo or a melody.
- Choose USER to set per note how many semitones the voice sits above or below.
- Keep DIRECT LEVEL at 100 and set the voice LEVEL lower for a subtle addition.
Where it goes in the chain
Put it after compressor and drive and before modulation and delay, so the extra voices are carried along. Use it on one note at a time for the cleanest result.
Starting points
Fat bass
VOICE 1 VOICE · 1: HARMONY -2oct · 1: LEVEL 50 · DIRECT LEVEL 100
A voice two octaves below your note for extra weight.
High addition
VOICE 1 VOICE · 1: HARMONY +2oct · 1: LEVEL 35 · DIRECT LEVEL 100
A bright voice above, for solos and melodies.
Two voices wide
VOICE 2 STEREO · 1: HARMONY -3rd · 2: HARMONY +2oct · DIRECT LEVEL 100
Two voices spread over left and right, with the bass in the centre.
Every setting
| Setting | Range | What it does |
|---|---|---|
| VOICE | 1 VOICE / 2 MONO / 2 STEREO | The number of voices. 1 VOICE is one voice, 2 MONO is two voices together in the centre, 2 STEREO spreads them over left and right. |
| 1: HARMONY 2: HARMONY | -2oct / -14th / -13th / -12th … +2oct / USER (30 steps) | The pitch of voice 1 and 2 compared with your note, up to two octaves down or up. With USER you set your own scale. |
| 1: LEVEL 2: LEVEL | 0 to 100 | The volume of voice 1 and 2. Lower keeps the voice in the background, higher makes it as clear as your own note. |
| 1: PRE-DELAY 2: PRE-DELAY | 0ms / 1ms / 2ms / 3ms … 1/1D / 2/1 (319 steps) | Delays voice 1 and 2 a little, in milliseconds or a note value. 0ms sounds direct, longer gives a real second instrument. |
| 1: FEEDBACK | 0 to 100 | Feeds the voice back into itself, so repeats appear that keep climbing or falling. Higher gives more repeats. |
| DIRECT LEVEL | 0 to 100 | The volume of your clean bass next to the voices. At 100 the root stays complete, so the low end stays firm. |
| HR1: C HR1: D♭ HR1: D HR1: E♭ HR1: E HR1: F HR1: F# HR1: G HR1: A♭ HR1: A HR1: B♭ HR1: B | 0 to 48 | The USER scale of voice 1: per note you choose how many semitones the voice shifts. Only matters when HARMONY is set to USER. |
| HR2: C HR2: D♭ HR2: D HR2: E♭ HR2: E HR2: F HR2: F# HR2: G HR2: A♭ HR2: A HR2: B♭ HR2: B | 0 to 48 | The USER scale of voice 2: per note you choose how many semitones the voice shifts. Only matters when HARMONY is set to USER. |
The settings were checked against the BOSS GX-100 Parameter Guide, version 2.00. This explanation was written by the makers of GX Board, not by BOSS. The official description of every setting is in the BOSS Parameter Guide. BASS HARMONIST in the BOSS Parameter Guide · GX-100 manuals at BOSS
More in Pitch and simulation
Turn it yourself?
In GX Board, BASS HARMONIST is a device in your rack, with all its controls on the front.